1” HORIZONTAL Custom ALUMINUM
1”x1 1/2” HEAD RAIL
Custom Economy
PRODUCT SPECIFICATIONS
| Head Rail | 1.5” x 1”x 0.024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats |
| Bottom Rail | Sculpted .024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats. |
| Slats | Aluminum Heat Treated and Tempered, 1” wide x .006 thick. |
| Valance | Double Slat with clips to mount. |
| Tilter | Shall be of worm gear construction, enclosed in housing of engineering polymer; gear and shaft shall be of engineering polymer with slip clutch mechanism. May be positioned at right or left with or without cord lock. |
| Tilt Rod | Shall be solid steel with corrosion resistant finish. |
| Tilt Wands | Shall be extruded, clear solid acrylic wand. |
| Cord Lock | Shall be of Snap-In-Design and incorporates stainless steel wear guard over which cords pass and a floating type locking pin. Locking pin shall be free of abrasive teeth and offer minimum wear to the cord. |
| Lift Cords | Shall be two-ply polyester cord filler and braided polyester jacket. |
| Braided Ladders | Shall be 100% polyester yarn color coordinated with the slats. Spacing shall not be more than 22.5 mm (approximately 13 slats per foot of drop). |
| Installation Brackets | 1 9/16” x 1 3/8” x 1 7/8” x.042 thick steel box brackets. Blinds over 48”shall have intermediate supports. |
| Tassel | Shall comply with all safety requirements |
| Sizes | Outside mounted window coverings will be made to exact ordered measurements. Inside mounted horizontal blinds will have ½” deducted at the factory from width. See Product Limits. |
| Commercial Contract Color Options | Shimmering White (M101), Igloo (M1004), Polar Bear (M1007), China Stone (M1013), Coconut (M1022), Antique Lace (M1025) |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Tilt-Only Center of Head Rail | 5" | 132" | 6" | 126" |
| Split Controls (L/R or R/L) | 9 1/2" | 132" | 6" | 126" |
| Same-Side Controls (L/L or R/R) | 9 1/2" | 132" | 6" | 126" |
*Maximum Sq. Footage *126 sq. ft. under warranty
Exceptions available upon request
Custom Economy Premium
(Perforated Slats)
PRODUCT SPECIFICATIONS
| Head Rail | 1.5” x 1”x 0.024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats |
| Bottom Rail | Sculpted .024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats. |
| Perforated Slats | Aluminum Heat Treated and Tempered, 1” wide x .008 thick. |
| Valance | Double Slat with clips to mount. |
| Tilter | Shall be of worm gear construction, enclosed in housing of engineering polymer; gear and shaft shall be of engineering polymer with slip clutch mechanism. May be positioned at right or left with or without cord lock. |
| Tilt Rod | Shall be solid steel with corrosion resistant finish. |
| Tilt Wands | Shall be extruded, clear solid acrylic wand. |
| Cord Lock | Shall be of Snap-In-Design and incorporates stainless steel wear guard over which cords pass and a floating type locking pin. Locking pin shall be free of abrasive teeth and offer minimum wear to the cord. |
| Lift Cords | Shall be two-ply polyester cord filler and braided polyester jacket. |
| Braided Ladders | Shall be 100% polyester yarn color coordinated with the slats. Spacing shall not be more than 22.5 mm (approximately 13 slats per foot of drop). |
| Installation Brackets | 1 9/16” x 1 3/8” x 1 7/8” x.042 thick steel box brackets. Blinds over 48”shall have intermediate supports. |
| Tassel | Shall comply with all safety requirements |
| Sizes | Outside mounted window coverings will be made to exact ordered measurements. Inside mounted horizontal blinds will have ½” deducted at the factory from width. See Product Limits. |
| Commercial Contract Color Options |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Tilt-Only Center of Head Rail | 5" | 132" | 6" | 126" |
| Split Controls (L/R or R/L) | 9 1/2" | 132" | 6" | 126" |
| Same-Side Controls (L/L or R/R) | 9 1/2" | 132" | 6" | 126" |
*Maximum Sq. Footage *126 sq. ft. under warranty
Exceptions available upon request
Custom Deluxe
PRODUCT SPECIFICATIONS
| Head Rail | 1” x 1.5”x .024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats. |
| Bottom Rail | Sculpted .024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats. |
| Slats | Aluminum Heat Treated and Tempered, 1” wide x .006 thick. |
| Valance | Double Slat with clips to mount. |
| Tilter | Shall be of worm gear construction, enclosed in housing of engineering polymer; gear and shaft shall be of engineering polymer with slip clutch mechanism. May be positioned at right or left with or without cord lock. |
| Tilt Rod | Shall be solid steel with corrosion resistant finish. |
| Tilt Wands | Shall be extruded, clear solid acrylic wand. |
| Cord Lock | Shall be of Snap-In-Design and incorporates stainless steel wear guard over which cords pass and a floating type locking pin. Locking pin shall be free of abrasive teeth and offer minimum wear to the cord. |
| Lift Cords | Shall be two-ply polyester cord filler and braided polyester jacket. |
| Braided Ladders | Shall be 100% polyester yarn color coordinated with the slats. Spacing shall not be more than 21.5 mm (approximately 14 slats per foot of drop). |
| Installation Brackets | 1 9/16” x 1 3/8” x 1 7/8” x.042 thick steel box brackets. Blinds over 48”shall have intermediate supports. |
| Tassel | Shall comply with all safety requirements |
| Sizes | Outside mounted window coverings will be made to exact ordered measurements. Inside mounted horizontal blinds will have ½”deducted at the factory from width. See Product Limits. |
| Commercial Contract Color Options | Shimmering White (M101), Igloo (M1004), Polar Bear (M1007), China Stone (M1013), Coconut (M1022), Antique Lace (M1025) |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Tilt-Only Center of Head Rail | 5" | 132" | 6" | 126" |
| Split Controls (L/R or R/L) | 9 1/2" | 132" | 6" | 126" |
| Same-Side Controls (L/L or R/R) | 9 1/2" | 132" | 6" | 126" |
*Maximum Sq. Footage *126 sq. ft. under warranty
Exceptions available upon request
Custom Privacy
PRODUCT SPECIFICATIONS
| Head Rail | 1” x 1.5”x .024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats. |
| Bottom Rail | Sculpted .024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats. |
| Slats | Aluminum Heat Treated and Tempered, 1” wide x .006 thick. |
| Valance | Double Slat with clips to mount. |
| Tilter | Shall be of worm gear construction, enclosed in housing of engineering polymer; gear and shaft shall be of engineering polymer with slip clutch mechanism. May be positioned at right or left with or without cord lock. |
| Tilt Rod | Shall be solid steel with corrosion resistant finish. |
| Tilt Wands | Shall be extruded, clear solid acrylic wand. |
| Cord Lock | Shall be of Snap-In-Design and incorporates stainless steel wear guard over which cords pass and a floating type locking pin. Locking pin shall be free of abrasive teeth and offer minimum wear to the cord. |
| Lift Cords | Shall be two-ply polyester cord filler and braided polyester jacket. |
| Braided Ladders | Shall be 100% polyester yarn color coordinated with the slats. Spacing shall not be more than 21.5 mm (approximately 14 slats per foot of drop). |
| Installation Brackets | 1 9/16” x 1 3/8” x 1 7/8” x.042 thick steel box brackets. Blinds over 48”shall have intermediate supports. |
| Tassel | Shall comply with all safety requirements |
| Sizes | Outside mounted window coverings will be made to exact ordered measurements. Inside mounted horizontal blinds will have ½”deducted at the factory from width. See Product Limits. |
| Commercial Contract Color Options | Shimmering White (M101), Igloo (M1004), Polar Bear (M1007), China Stone (M1013), Coconut (M1022), Antique Lace (M1025) |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Tilt-Only Center of Head Rail | 5" | 132" | 6" | 126" |
| Split Controls (L/R or R/L) | 9 1/2" | 132" | 6" | 126" |
| Same-Side Controls (L/L or R/R) | 9 1/2" | 132" | 6" | 126" |
*Maximum Sq. Footage *126 sq. ft. under warranty
Exceptions available upon request
Custom Economy Premium
PRODUCT SPECIFICATIONS
| Head Rail | 1” x 1.5”x .024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats. |
| Bottom Rail | Sculpted .024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats. |
| Slats | Aluminum Heat Treated and Tempered, 1” wide x .008 thick. |
| Valance | Double Slat with clips to mount. |
| Tilter | Shall be of worm gear construction, enclosed in housing of engineering polymer; gear and shaft shall be of engineering polymer with slip clutch mechanism. May be positioned at right or left with or without cord lock. |
| Tilt Rod | Shall be solid steel with corrosion resistant finish. |
| Tilt Wands | Shall be extruded, clear solid acrylic wand. |
| Cord Lock | Shall be of Snap-In-Design and incorporates stainless steel wear guard over which cords pass and a floating type locking pin. Locking pin shall be free of abrasive teeth and offer minimum wear to the cord. |
| Lift Cords | Shall be two-ply polyester cord filler and braided polyester jacket. |
| Braided Ladders | Shall be 100% polyester yarn color coordinated with the slats. Spacing shall not be more than 22.5 mm (approximately 13 slats per foot of drop). |
| Installation Brackets | 1 9/16” x 1 3/8” x 1 7/8” x.042 thick steel box brackets. Blinds over 48”shall have intermediate supports. |
| Tassel | Shall comply with all safety requirements |
| Sizes | Outside mounted window coverings will be made to exact ordered measurements. Inside mounted horizontal blinds will have ½”deducted at the factory from width. See Product Limits. |
| Commercial Contract Color Options | Shimmering White (M101), Igloo (M1004), Polar Bear (M1007), Coconut (M1022) |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Tilt-Only Center of Head Rail | 5" | 132" | 6" | 126" |
| Split Controls (L/R or R/L) | 9 1/2" | 132" | 6" | 126" |
| Same-Side Controls (L/L or R/R) | 9 1/2" | 132" | 6" | 126" |
*Maximum Sq. Footage *126 sq. ft. under warranty
Exceptions available upon request
Custom Economy
(No Valence)
PRODUCT SPECIFICATIONS
| Head Rail | 1” x 1.5”x .024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats. |
| Bottom Rail | Sculpted .024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats. |
| Slats | Aluminum Heat Treated and Tempered, 1” wide x .006 thick. |
| Valance | Double Slat with clips to mount. |
| Tilter | Shall be of worm gear construction, enclosed in housing of engineering polymer; gear and shaft shall be of engineering polymer with slip clutch mechanism. May be positioned at right or left with or without cord lock. |
| Tilt Rod | Shall be solid steel with corrosion resistant finish. |
| Tilt Wands | Shall be extruded, clear solid acrylic wand. |
| Cord Lock | Shall be of Snap-In-Design and incorporates stainless steel wear guard over which cords pass and a floating type locking pin. Locking pin shall be free of abrasive teeth and offer minimum wear to the cord. |
| Lift Cords | Shall be two-ply polyester cord filler and braided polyester jacket. |
| Braided Ladders | Shall be 100% polyester yarn color coordinated with the slats. Spacing shall not be more than 22.5 mm (approximately 13 slats per foot of drop). |
| Installation Brackets | 1 9/16” x 1 3/8” x 1 7/8” x.042 thick steel box brackets. Blinds over 48”shall have intermediate supports. |
| Tassel | Shall comply with all safety requirements |
| Sizes | Outside mounted window coverings will be made to exact ordered measurements. Inside mounted horizontal blinds will have ½”deducted at the factory from width. See Product Limits. |
| Commercial Contract Color Options | Shimmering White (M101), Igloo (M1004), Polar Bear (M1007), China Stone (M1013), Coconut (M1022), Antique Lace (M1025) |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Tilt-Only Center of Head Rail | 5" | 132" | 6" | 126" |
| Split Controls (L/R or R/L) | 9 1/2" | 132" | 6" | 126" |
| Same-Side Controls (L/L or R/R) | 9 1/2" | 132" | 6" | 126" |
*Maximum Sq. Footage *126 sq. ft. under warranty
Exceptions available upon request
Custom Deluxe Premium
PRODUCT SPECIFICATIONS
| Head Rail | 1” x 1.5”x .024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats. |
| Bottom Rail | Sculpted .024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats. |
| Slats | Aluminum Heat Treated and Tempered, 1” wide x .008 thick. |
| Valance | Double Slat with clips to mount. |
| Tilter | Shall be of worm gear construction, enclosed in housing of engineering polymer; gear and shaft shall be of engineering polymer with slip clutch mechanism. May be positioned at right or left with or without cord lock. |
| Tilt Rod | Shall be solid steel with corrosion resistant finish. |
| Tilt Wands | Shall be extruded, clear solid acrylic wand. |
| Cord Lock | Shall be of Snap-In-Design and incorporates stainless steel wear guard over which cords pass and a floating type locking pin. Locking pin shall be free of abrasive teeth and offer minimum wear to the cord. |
| Lift Cords | Shall be two-ply polyester cord filler and braided polyester jacket. |
| Braided Ladders | Shall be 100% polyester yarn color coordinated with the slats. Spacing shall not be more than 22.5 mm (approximately 13 slats per foot of drop). |
| Installation Brackets | 1 9/16” x 1 3/8” x 1 7/8” x.042 thick steel box brackets. Blinds over 48”shall have intermediate supports. |
| Tassel | Shall comply with all safety requirements |
| Sizes | Outside mounted window coverings will be made to exact ordered measurements. Inside mounted horizontal blinds will have ½”deducted at the factory from width. See Product Limits. |
| Commercial Contract Color Options | Shimmering White (M101), Igloo (M1004), Polar Bear (M1007), Coconut (M1022) |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Tilt-Only Center of Head Rail | 5" | 132" | 6" | 126" |
| Split Controls (L/R or R/L) | 9 1/2" | 132" | 6" | 126" |
| Same-Side Controls (L/L or R/R) | 9 1/2" | 132" | 6" | 126" |
*Maximum Sq. Footage *126 sq. ft. under warranty
Exceptions available upon request
Custom Privacy Premium
PRODUCT SPECIFICATIONS
| Head Rail | 1” x 1.5”x .024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats. |
| Bottom Rail | Sculpted .024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats. |
| Slats | Aluminum Heat Treated and Tempered, 1” wide x .008 thick. |
| Valance | Double Slat with clips to mount. |
| Tilter | Shall be of worm gear construction, enclosed in housing of engineering polymer; gear and shaft shall be of engineering polymer with slip clutch mechanism. May be positioned at right or left with or without cord lock. |
| Tilt Rod | Shall be solid steel with corrosion resistant finish. |
| Tilt Wands | Shall be extruded, clear solid acrylic wand. |
| Cord Lock | Shall be of Snap-In-Design and incorporates stainless steel wear guard over which cords pass and a floating type locking pin. Locking pin shall be free of abrasive teeth and offer minimum wear to the cord. |
| Lift Cords | Shall be two-ply polyester cord filler and braided polyester jacket. |
| Braided Ladders | Shall be 100% polyester yarn color coordinated with the slats. Spacing shall not be more than 22.5 mm (approximately 17 slats per foot of drop). |
| Installation Brackets | 1 9/16” x 1 3/8” x 1 7/8” x.042 thick steel box brackets. Blinds over 48”shall have intermediate supports. |
| Tassel | Shall comply with all safety requirements |
| Sizes | Outside mounted window coverings will be made to exact ordered measurements. Inside mounted horizontal blinds will have ½”deducted at the factory from width. See Product Limits. |
| Commercial Contract Color Options | Shimmering White (M101), Igloo (M1004), Polar Bear (M1007), Coconut (M1022) |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Tilt-Only Center of Head Rail | 5" | 132" | 6" | 126" |
| Split Controls (L/R or R/L) | 9 1/2" | 132" | 6" | 126" |
| Same-Side Controls (L/L or R/R) | 9 1/2" | 132" | 6" | 126" |
*Maximum Sq. Footage *126 sq. ft. under warranty
Exceptions available upon request