1” HORIZONTAL MINI ALUMINUM
1”x1” HEAD RAIL
MINI PRIVACY
PRODUCT SPECIFICATIONS
| Head Rail | 1” x 1”x 0.024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats |
| Bottom Rail | C-shaped .024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats |
| Slats | Aluminum Heat Treated and Tempered, 1” wide x .006 thick |
| Valance | Double Slat with clips to mount |
| Tilter | Shall be of worm gear construction, enclosed in housing of engineering polymer; gear and shaft shall be of engineering polymer with slip clutch mechanism. May be positioned at right or left with or without cord lock |
| Tilt Rod | solid steel with corrosion resistant finish |
| Tilt Wands | Extruded, clear solid acrylic wand |
| Cord Lock | Snap-In-Design and incorporates stainless steel wear guard over which cords pass and a floating type locking pin. Locking pin shall be free of abrasive teeth and offer minimum wear to the cord |
| Lift Cords | Two-ply polyester cord filler and braided polyester jacket |
| Braided Ladders | 100% polyester yarn color coordinated with the slats. Spacing shall not be more than 18.5mm (approximately 17 slats per foot of drop) |
| Installation Brackets | 1 9/16” x 1 3/8” x 1 7/8” x.042 thick steel box brackets. Blinds over 48”shall have intermediate supports |
| Tassel | Complies with all safety requirements |
| Sizes | Outside mounted window coverings will be made to exact ordered measurements. Inside mounted horizontal blinds will have ½” deducted at the factory from width. See Product Limits |
| Commercial Contract Color Options | Shimmering White (M101), Igloo (M1004), Polar Bear (M1007), China Stone (M1013), Coconut (M1022), Antique Lace (M1025) |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Tilt-Only Center of Head Rail | 5" | 132" | 6" | 126" |
| Split Controls (L/R or R/L) | 9 1/2" | 132" | 6" | 126" |
| Same-Side Controls (L/L or R/R) | 9 1/2" | 132" | 6" | 126" |
*Maximum Sq. Footage *126 sq. ft. under warranty
Exceptions available upon request
MINI ECONOMY
PRODUCT SPECIFICATIONS
| Head Rail | 1” x 1”x 0.024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats |
| Bottom Rail | C-shaped .024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats |
| Slats | Aluminum Heat Treated and Tempered, 1” wide x .006 thick |
| Valance | Double Slat with clips to mount. |
| Tilter | Shall be of worm gear construction, enclosed in housing of engineering polymer; gear and shaft shall be of engineering polymer with slip clutch mechanism. May be positioned at right or left with or without cord lock. |
| Tilt Rod | Shall be solid steel with corrosion resistant finish. |
| Tilt Wands | Shall be extruded, clear solid acrylic wand. |
| Cord Lock | Shall be of Snap-In-Design and incorporates stainless steel wear guard over which cords pass and a floating type locking pin. Locking pin shall be free of abrasive teeth and offer minimum wear to the cord. |
| Lift Cords | Shall be two-ply polyester cord filler and braided polyester jacket |
| Braided Ladders | Shall be 100% polyester yarn color coordinated with the slats. Spacing shall not be more than 22.5 mm (approximately 13 slats per foot of drop). |
| Installation Brackets | 1 9/16” x 1 3/8” x 1 7/8” x.042 thick steel box brackets. Blinds over 48”shall have intermediate supports. |
| Tassel | Shall comply with all safety requirements |
| Sizes | Outside mounted window coverings will be made to exact ordered measurements. Inside mounted horizontal blinds will have ½” deducted at the factory from width. See Product Limits |
| Commercial Contract Color Options | Shimmering White (M1001), Igloo (M1004), Polar Bear (M1007), China Stone (M1013), Coconut (M1022), Antique Lace (M1025) |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Tilt-Only Center of Head Rail | 5" | 132" | 6" | 126" |
| Split Controls (L/R or R/L) | 9 1/2" | 132" | 6" | 126" |
| Same-Side Controls (L/L or R/R) | 9 1/2" | 132" | 6" | 126" |
*Maximum Sq. Footage *126 sq. ft. under warranty
Exceptions available upon request
MINI DELUXE
PRODUCT SPECIFICATIONS
| Head Rail | 1” x 1”x 0.024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats. |
| Bottom Rail | C-Shaped .024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats. |
| Slats | Aluminum Heat Treated and Tempered, 1” wide x .006 thick. |
| Valance | Double Slat with clips to mount. |
| Tilter | Shall be of worm gear construction, enclosed in housing of engineering polymer; gear and shaft shall be of engineering polymer with slip clutch mechanism. May be positioned at right or left with or without cord lock |
| Tilt Rod | Shall be solid steel with corrosion resistant finish. |
| Tilt Wands | Shall be extruded, clear solid acrylic wand. |
| Cord Lock | Shall be of Snap-In-Design and incorporates stainless steel wear guard over which cords pass and a floating type locking pin. Locking pin shall be free of abrasive teeth and offer minimum wear to the cord. |
| Lift Cords | Shall be two-ply polyester cord filler and braided polyester jacket. |
| Braided Ladders | Shall be 100% polyester yarn color coordinated with the slats. Spacing shall not be more than 21.5 mm (approximately 14 slats per foot of drop). |
| Installation Brackets | 1 9/16” x 1 3/8” x 1 7/8” x.042 thick steel box brackets. Blinds over 48”shall have intermediate supports. |
| Tassel | Shall comply with all safety requirements |
| Sizes | Outside mounted window coverings will be made to exact ordered measurements. Inside mounted horizontal blinds will have ½” deducted at the factory from width. See Product Limits |
| Commercial Contract Color Options | Shimmering White (M1001), Igloo (M1004), Polar Bear (M1007), China Stone (M1013), Coconut (M1022), Antique Lace (M1025) |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Tilt-Only Center of Head Rail | 5" | 132" | 6" | 126" |
| Split Controls (L/R or R/L) | 9 1/2" | 132" | 6" | 126" |
| Same-Side Controls (L/L or R/R) | 9 1/2" | 132" | 6" | 126" |
*Maximum Sq. Footage *126 sq. ft. under warranty
Exceptions available upon request
MINI PRIVACY PREMIUM
PRODUCT SPECIFICATIONS
| Head Rail | 1” x 1”x 0.024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats. |
| Bottom Rail | C-Shaped .024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats. |
| Slats | Aluminum Heat Treated and Tempered, 1” wide x .008 thick. |
| Valance | Double Slat with clips to mount. |
| Tilter | Shall be of worm gear construction, enclosed in housing of engineering polymer; gear and shaft shall be of engineering polymer with slip clutch mechanism. May be positioned at right or left with or without cord lock |
| Tilt Rod | Shall be solid steel with corrosion resistant finish. |
| Tilt Wands | Shall be extruded, clear solid acrylic wand. |
| Cord Lock | Shall be of Snap-In-Design and incorporates stainless steel wear guard over which cords pass and a floating type locking pin. Locking pin shall be free of abrasive teeth and offer minimum wear to the cord. |
| Lift Cords | Shall be two-ply polyester cord filler and braided polyester jacket. |
| Braided Ladders | Shall be 100% polyester yarn color coordinated with the slats. Spacing shall not be more than 18.5mm (approximately 17 slats per foot of drop). |
| Installation Brackets | 1 9/16” x 1 3/8” x 1 7/8” x.042 thick steel box brackets. Blinds over 48”shall have intermediate supports. |
| Tassel | Shall comply with all safety requirements |
| Sizes | Outside mounted window coverings will be made to exact ordered measurements. Inside mounted horizontal blinds will have ½” deducted at the factory from width. See Product Limits |
| Commercial Contract Color Options | Shimmering White (M1001), Igloo (M1004), Polar Bear (M1007), Coconut (M1022) |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Tilt-Only Center of Head Rail | 5" | 132" | 6" | 126" |
| Split Controls (L/R or R/L) | 9 1/2" | 132" | 6" | 126" |
| Same-Side Controls (L/L or R/R) | 9 1/2" | 132" | 6" | 126" |
*Maximum Sq. Footage *126 sq. ft. under warranty
Exceptions available upon request
MINI ECONOMY PREMIUM
PRODUCT SPECIFICATIONS
| Head Rail | 1” x 1”x 0.024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats. |
| Bottom Rail | C-Shaped .024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats. |
| Slats | Aluminum Heat Treated and Tempered, 1” wide x .008 thick. |
| Valance | Double Slat with clips to mount. |
| Tilter | Shall be of worm gear construction, enclosed in housing of engineering polymer; gear and shaft shall be of engineering polymer with slip clutch mechanism. May be positioned at right or left with or without cord lock |
| Tilt Rod | Shall be solid steel with corrosion resistant finish. |
| Tilt Wands | Shall be extruded, clear solid acrylic wand |
| Cord Lock | Shall be of Snap-In-Design and incorporates stainless steel wear guard over which cords pass and a floating type locking pin. Locking pin shall be free of abrasive teeth and offer minimum wear to the cord. |
| Lift Cords | Shall be two-ply polyester cord filler and braided polyester jacket. |
| Braided Ladders | Shall be 100% polyester yarn color coordinated with the slats. Spacing shall not be more than 22.5 mm (approximately 13 slats per foot of drop). |
| Installation Brackets | 1 9/16” x 1 3/8” x 1 7/8” x.042 thick steel box brackets. Blinds over 48”shall have intermediate supports. |
| Tassel | Shall comply with all safety requirements |
| Sizes | Outside mounted window coverings will be made to exact ordered measurements. Inside mounted horizontal blinds will have ½” deducted at the factory from width. See Product Limits |
| Commercial Contract Color Options | Shimmering White (M1001), Igloo (M1004), Polar Bear (M1007), Coconut (M1022) |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Tilt-Only Center of Head Rail | 5" | 132" | 6" | 126" |
| Split Controls (L/R or R/L) | 9 1/2" | 132" | 6" | 126" |
| Same-Side Controls (L/L or R/R) | 9 1/2" | 132" | 6" | 126" |
*Maximum Sq. Footage *126 sq. ft. under warranty
Exceptions available upon request
MINI DELUXE PREMIUM
PRODUCT SPECIFICATIONS
| Head Rail | 1” x 1”x 0.024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats. |
| Bottom Rail | C-Shaped .024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats. |
| Slats | Aluminum Heat Treated and Tempered, 1” wide x .008 thick. |
| Valance | Double Slat with clips to mount. |
| Tilter | Shall be of worm gear construction, enclosed in housing of engineering polymer; gear and shaft shall be of engineering polymer with slip clutch mechanism. May be positioned at right or left with or without cord lock |
| Tilt Rod | Shall be solid steel with corrosion resistant finish. |
| Tilt Wands | Shall be extruded, clear solid acrylic wand. |
| Cord Lock | Shall be of Snap-In-Design and incorporates stainless steel wear guard over which cords pass and a floating type locking pin. Locking pin shall be free of abrasive teeth and offer minimum wear to the cord. |
| Lift Cords | Shall be two-ply polyester cord filler and braided polyester jacket. |
| Braided Ladders | Shall be 100% polyester yarn color coordinated with the slats. Spacing shall not be more than 21.5 mm (approximately 14 slats per foot of drop). |
| Installation Brackets | 1 9/16” x 1 3/8” x 1 7/8” x.042 thick steel box brackets. Blinds over 48”shall have intermediate supports. |
| Tassel | Shall comply with all safety requirements |
| Sizes | Outside mounted window coverings will be made to exact ordered measurements. Inside mounted horizontal blinds will have ½”deducted at the factory from width. See Product Limits. |
| Commercial Contract Color Options | Shimmering White (M1001), Igloo (M1004), Polar Bear (M1007), Coconut (M1022) |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Tilt-Only Center of Head Rail | 5" | 132" | 6" | 126" |
| Split Controls (L/R or R/L) | 9 1/2" | 132" | 6" | 126" |
| Same-Side Controls (L/L or R/R) | 9 1/2" | 132" | 6" | 126" |
*Maximum Sq. Footage *126 sq. ft. under warranty
Exceptions available upon request