2" Horizontals Blinds
CUSTOM CUT FOR A NATURAL LOOK.
Each slat of our 2” horizontal blinds are custom cut by our Monroe, Washington-based manufacturing department. We don't leave your customers guessing which size they may need, like the big box stores. We provide you with a clean, finished product that will fit their windows perfectly. 2” horizontal blinds can be ordered in natural wood, faux wood or bamboo options.
2” Horizontal Colors
Alabaster
Blanco
Blanco - Real Wood
Bleached Sand
Bleached Sand
Bone
Bone - Real Wood
Bourbon
Bourbon - Real Wood
Bourbon
Bright White
Bright White
Cherry - Real Wood
Cherry
Cherrywood
Cherrywood - Real Wood
Chestnut
Dark Mahogany - Real Wood
Dark Mahogany
Evening Oak
Evening Oak - Real Wood
Granite
Grey Skies
Kona
Kona - Real Wood
Mahogany - Real Wood
Mahogany
Maple
Merlot
Mink
Mink - Real Wood
Natural
Natural
Natural - Real Wood
Oak
Oak
Off White
Oyster
Oyster
Pearl
Pebble
Pecan
Shadow
Shale Rock
Snow White
Sunrise Oak - Real Wood
Sunrise Oak
Teak
Teak
Toasted Walnut
Toasted Walnut - Real Wood
Vivid White
Vivid White
Walnut
Warm Chestnut - Real Wood
Warm Chestnut
White
White
2” Summit Woods (Basswood)
PRODUCT SPECIFICATIONS
| Head Rail | 2” x 2”x 0.024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats |
| Bottom Rail | Trapezoid shape, made of 100% wood with beaded design. Color coordinated to match slats. |
| Slats | 100% Basswood 2” wide x 1/8” thick. Vertically cut, guaranteed not to warp. |
| Valance | Composite Royal Valance. Standard outside mount returns 3”. |
| Tilter | Shall be of worm gear construction, enclosed in housing of engineered polymer. May be positioned at right or left. Cord tilter available upon request. |
| Tilt Rod | Shall be solid steel with corrosion resistant finish. |
| Tilt Wands | Shall be solid wood, color coordinated to match slats. |
| Fabric Tape (Optional) | 1.5” wide woven 100% cotton cloth tape ladder. Available in 24 designer colors. |
| Cord Lock | Shall be of Snap-In-Design and incorporates stainless steel wear guard over which cords pass and a floating type locking pin. Locking pin shall be free of abrasive teeth and offer minimum wear to the cord. Cord lock shall incorporate crash proof safety feature that shall lock blind automatically upon release of cord. |
| Lift Cords | Shall be two-ply polyester cord filler and braided polyester jacket. |
| Braided Ladders | Shall be 100% polyester yarn color coordinated with the slats. Spacing shall not be more than 44mm (approximately 7 slats per foot of drop). |
| Installation Brackets | End brackets shall be 2” x 2” .042” steel box brackets. Blinds over 48” shall have intermediate supports. |
| Tassel | Shall be made of real wood. Shall comply with all safety requirements. |
| Sizes | Outside mounted window coverings will be made to exact ordered measurements. Inside mounted horizontal blinds will have ½” deducted at the factory from width. See Product Limits. |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Tilt-Only Center of Head Rail | 8" | 120" | 10" | 120" |
| Split Controls (L/R or R/L) | 9 1/4" | 120" | 10" | 120" |
| Same-Side Controls (L/L or R/R) | 16 1/8" | 120" | 10" | 120" |
Maximum Sq. Footage *120 sq. ft. under warranty
*Exceptions available upon request
2” Aluminum Standard
PRODUCT SPECIFICATIONS
| Head Rail | 2” x 2”x 0.024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats |
| Bottom Rail | Enclosed 024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats. |
| Slats | Aluminum Heat Treated and Tempered, 2” wide x .008 thick. |
| Valance | 1 Slat. 2 Slats Optional. |
| Tilter | Shall be of worm gear construction, enclosed in housing of engineered polymer. May be positioned at right or left with or without cord lock. |
| Tilt Rod | Shall be solid steel with corrosion resistant finish. |
| Tilt Wands | Shall be extruded, clear solid acrylic with tubular construction. |
| Fabric Tape (Optional) | 1.5” woven 100% cotton cloth tape ladder. Available in 24 designer colors. |
| Cord Lock | Shall be of Snap-In-Design and incorporates stainless steel wear guard over which cords pass and a floating type locking pin. Locking pin shall be free of abrasive teeth and offer minimum wear to the cord. |
| Lift Cords | Shall be two-ply polyester cord filler and braided polyester jacket. |
| Braided Ladders | Shall be 100% polyester yarn color coordinated with the slats. Spacing shall not be more than 44mm (approximately 7 slats per foot of drop). |
| Installation Brackets | End brackets shall be 2” x 2” .042” steel box brackets. Blinds over 48” shall have intermediate supports. |
| Tassel | Shall comply with all safety requirements. |
| Sizes | Outside mounted window coverings will be made to exact ordered measurements. Inside mounted horizontal blinds will have ½” deducted at the factory from width. See Product Limits. |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Tilt-Only Center of Head Rail | 8" | 122" | 10" | 120" |
| Split Controls (L/R or R/L) | 9 1/4" | 122" | 10" | 120" |
| Same-Side Controls (L/L or R/R) | 16 1/8" | 122" | 10" | 120" |
Maximum Sq. Footage *120 sq. ft. under warranty
*Exceptions available upon request
2” Olympic Ridge (Faux)
PRODUCT SPECIFICATIONS
| Head Rail | 2” x 2”x 0.024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats. |
| Bottom Rail | Trapezoid shape, made of composite materials. Color coordinated to match slats. |
| Slats | Foam composite, 2” wide x 0.125” thick. |
| Valance | Composite Royal Valance. Standard outside mount returns 3”. |
| Tilter | Shall be of worm gear construction, enclosed in housing of engineered polymer. |
| Tilt Rod | Shall be solid steel with corrosion resistant finish. |
| Tilt Wands | Shall be solid wood, color coordinated to match slats. |
| Fabric Tape (Optional) | 1.5” wide woven 100% cotton cloth tape ladder. Available in 24 designer colors. |
| Cord Lock | Shall be of Snap-In-Design and incorporates stainless steel wear guard over which cords pass and a floating type locking pin. Locking pin shall be free of abrasive teeth and offer minimum wear to the cord. Cord lock shall incorporate crash proof safety feature that shall lock blind automatically upon release of cord. |
| Lift Cords | Shall be two-ply polyester cord filler and braided polyester jacket. |
| Braided Ladders | Shall be 100% polyester yarn color coordinated with the slats. Spacing shall not be more than 44mm (approximately 7 slats per foot of drop). |
| Installation Brackets | End brackets shall be 2” x 2” .042” steel box brackets. Blinds over 48” shall have intermediate supports. |
| Tassel | Shall be made of real wood. Shall comply with all safety requirements. |
| Sizes | Outside mounted window coverings will be made to exact ordered measurements. Inside mounted horizontal blinds will have ½” deducted at the factory from width. See Product Limits. |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Tilt-Only Center of Head Rail | 8" | 108" | 10" | 120" |
| Split Controls (L/R or R/L) | 9 1/4" | 108" | 10" | 120" |
| Same-Side Controls (L/L or R/R) | 16 1/8" | 108" | 10" | 120" |
Maximum Sq. Footage *120 sq. ft. under warranty
*Exceptions available upon request
2.5” Olympic ridge (Faux)
PRODUCT SPECIFICATIONS
| Head Rail | 2” x 2”x 0.024” Steel. Treated to resist corrosion. Baked-on paint, color coordinated to slats |
| Bottom Rail | Trapezoid shape, made of composite materials. Color coordinated to match slats. |
| Slats | Foam composite, 2.5” wide x 0.125” thick. |
| Valance | Composite Royal Valance. Standard outside mount returns 3”. |
| Tilter | Shall be of gear construction, enclosed in housing of engineered polymer. |
| Tilt Rod | Shall be solid steel with corrosion resistant finish. |
| Tilt Wands | Shall be solid wood, color coordinated to match slats. |
| Fabric Tape (Optional) | 1.5” wide woven 100% cotton cloth tape ladder. Available in 24 designer colors. |
| Cord Lock | Shall be of Snap-In-Design and incorporates stainless steel wear guard over which cords pass and a floating type locking pin. Locking pin shall be free of abrasive teeth and offer minimum wear to the cord. Cord lock shall incorporate crash proof safety feature that shall lock blind automatically upon release of cord. |
| Lift Cords | Shall be two-ply polyester cord filler and braided polyester jacket. |
| Braided Ladders | Shall be 100% polyester yarn color coordinated with the slats. Spacing shall not be more than 44mm (approximately 7 slats per foot of drop). |
| Installation Brackets | End brackets shall be 2” x 2” .042” steel box brackets. Blinds over 48” shall have intermediate supports. |
| Tassel | Shall be made of real wood. Shall comply with all safety requirements. |
| Sizes | Outside mounted window coverings will be made to exact ordered measurements. Inside mounted horizontal blinds will have ½” deducted at the factory from width. See Product Limits. |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Tilt-Only Center of Head Rail | 8" | 120" | 10" | 120" |
| Split Controls (L/R or R/L) | 9 1/4" | 120" | 10" | 120" |
| Same-Side Controls (L/L or R/R) | 16 1/8" | 120" | 10" | 120" |
Maximum Sq. Footage *120 sq. ft. under warranty
*Exceptions available upon request