5.5” Z-Series
z-series fascia manual rs single shade
PRODUCT SPECIFICATIONS
| Operation | Bead chain through manual clutch mechanism. |
| Clutch | Bead chain driven assisted by a stainless steel spring and spring shim. Clutch housing made from Acetal POM Copolymer. |
| Spring Assist | Spring Assembly to assist in raising and lowering of heavy roller shades, to use Mount on the clutch inside the tube. Made of PBT with Glass Fiber and Spring Steel optional see manufactures chart for size recommendation. |
| Chain | Plastic, nickel plated steel, stainless steel. |
| Idle End | Made from glass fiber reinforced PA6. |
| Tube | 1 1/2”, 1 3/4”, 2”, 2 3/8” diameter hollow extruded aluminum(6063-T5) tube. |
| Clutch Insert Plate | 2 3/4” x 3 11/16”, cold rolled steel ASTM A1008, Zinc plated. |
| Idle End Insert Plate | 2 3/4” x 3 11/16”, cold rolled steel ASTM A1008, Zinc plated. |
| Square Fascia | Square front, 4 7/8”x 3/8” extruded aluminum, 6063-T5. Colors White, Bronze, Anodized. |
| Brackets | 5 1/2” x 5 3/16”, cold rolled steel ASTM A1008, Zinc plated. Wall or ceiling mount. |
| Fascia Spring Lock | Holds fascia to brackets. Spring Steel 65MN, ASTM1566, Zinc plated. |
| Bottom Closure Panel | 2”, 3”, 4” wide extruded aluminum, 6063-T5. Colors White, Bronze, Anodized. |
| Fascia End Cap | ABS, square, colors to match fascia. Colors White, Bronze, Anodized. |
| Internal Hembar | 1/8”x1” extruded aluminum 6063-T5 flat stock. |
| External Hembar | 1 3/6”x9/16” rectangle, 1 1/2”x3/8” rectangle extruded aluminum 6063-T5. Colors: White, Bronze, Alabaster, Anodized, Black. Available at additional cost. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| P-Clip Safety Tensioner | Clear Poly-Carbonite. Shall comply with all safety requirements. |
| Sizes | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Clutch Left or Right | 18" | 78" | 18" | 108" |
| Clutch Left or Right with Spring Assist | 36" | 156" | 18" | 240" |
z-series headbox manual rs single shade
PRODUCT SPECIFICATIONS
| Operation | Bead chain through manual clutch mechanism. |
| Clutch | Bead chain driven assisted by a stainless steel spring and spring shim. Clutch housing made from Acetal POM Copolymer. |
| Spring Assist | Spring Assembly to assist in raising and lowering of heavy roller shades, to use Mount on the clutch inside the tube. Made of PBT with Glass Fiber and Spring Steel optional see manufactures chart for size recommendation. |
| Chain | Plastic, nickel plated steel, stainless steel. |
| Idle End | Made from glass fiber reinforced PA6. |
| Tube | 1 1/2”, 1 3/4”, 2”, 2 3/8” diameter hollow extruded aluminum(6063-T5) tube. |
| Clutch Insert Plate | 2 3/4” x 3 11/16”, cold rolled steel ASTM A1008, Zinc plated. |
| Idle End Insert Plate | 2 3/4” x 3 11/16”, cold rolled steel ASTM A1008, Zinc plated. |
| Side Closure Panel | Square front, 2 3/4”x 3/8” with 3/4” wide lip for ACT to lay on, extruded aluminum, 6063-T5. Colors White |
| Brackets | 5 1/2” x 5 3/16”, cold rolled steel ASTM A1008, Zinc plated. Wall or ceiling mount. |
| Bottom Closure Panel | 2”, 3”, 4” wide extruded aluminum, 6063-T5. Colors White, Bronze, Anodized. |
| Internal Hembar | 1/8”x1” extruded aluminum 6063-T5 flat stock. |
| External Hembar | 1 3/6”x9/16” rectangle, 1 1/2”x3/8” rectangle extruded aluminum 6063-T5. Colors: White, Bronze, Alabaster, Anodized, Black. Available at additional cost. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| P-Clip Safety Tensioner | Clear Poly-Carbonite. Shall comply with all safety requirements. |
| Sizes | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Clutch Left or Right | 18" | 78" | 18" | 108" |
| Clutch Left or Right with Spring Assist | 36" | 156" | 18" | 240" |
5"x5.5" dual lip headbox
PRODUCT SPECIFICATIONS
| Head Box | 4 15/16”x 5 3/8” x 3/4” extruded aluminum (6063-T5). Color White. |
| Closure Lips | Dual closure lips for bottom closure panel, panel van be mounted for front or back roll of roller shade fabric. |
| ACT Lip | 3/4” wide lip on outside of Head Box for acoustic ceiling tile to rest on. |
| Mounting | Attach to framing substrate or inside framed pocket in ceiling, with pan head screws. Screw type and size TBD on site per site conditions. |
PRODUCT LIMITS
| Min. Width | As needed for smallest shade. |
| Max. Width | 20’, can be butted together for longer applications. |
z-series fascia motorized RS single shade
PRODUCT SPECIFICATIONS
| Operation | Tubular motor concealed inside roller tube. |
| Motor | Totally enclosed, insulated, thermal-overload protection, brake, permanently lubricated bearings, limit switch. |
| Tube Drive | PA6 plastic. |
| Idle End | Made from glass fiber reinforced PA6. |
| Crown | ABS plastic. |
| Tube | 1 1/2”, 2”, 2 3/8” diameter hollow extruded aluminum(6063-T5) tube. |
| Motor Insert Plate | 2 3/4” x 3 11/16”, cold rolled steel ASTM A1008, Zinc plated. |
| Idle End Insert Plate | 2 3/4” x 3 11/16”, cold rolled steel ASTM A1008, Zinc plated. |
| Square Fascia | Square front, 4 7/8”x 3/8” extruded aluminum, 6063-T5. Colors White, Bronze, Anodized. |
| Brackets | 5 1/2” x 5 3/16”, cold rolled steel ASTM A1008, Zinc plated. Wall or ceiling mount. |
| Fascia Spring Lock | Holds fascia to brackets. Spring Steel 65MN, ASTM1566, Zinc plated. |
| Fascia End Cap | ABS, square, colors to match fascia. Colors White, Bronze, Anodized. |
| Bottom Closure Panel | 2”, 3”, 4” wide extruded aluminum, 6063-T5. Colors White, Bronze, Anodized. |
| Internal Hembar | 1/8”x1” extruded aluminum 6063-T5 flat stock. |
| External Hembar | 1 3/6”x9/16” rectangle, 1 1/2”x3/8” rectangle extruded aluminum 6063-T5. Colors: White, Bronze, Alabaster, Anodized, Black. Available at additional cost. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| Control | RTS wall Switch, hand held RTS remote, wired wall switch. |
| Size | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Motor Left | 26" | 176" | 18" | 240" |
| Motor Right | 26" | 156" | 18" | 240" |
z-series headbox motorized RS single shade
PRODUCT SPECIFICATIONS
| Operation | Tubular motor concealed inside roller tube. |
| Motor | Totally enclosed, insulated, thermal-overload protection, brake, permanently lubricated bearings, limit switch. |
| Tube Drive | PA6 plastic. |
| Idle End | Made from glass fiber reinforced PA6. |
| Crown | ABS plastic. |
| Tube | 1 1/2”, 2”, 2 3/8” diameter hollow extruded aluminum(6063-T5) tube. |
| Motor Insert Plate | 2 3/4” x 3 11/16”, cold rolled steel ASTM A1008, Zinc plated. |
| Idle End Insert Plate | 2 3/4” x 3 11/16”, cold rolled steel ASTM A1008, Zinc plated. |
| Side Closure Panel | Square front, 2 3/4”x 3/8” with 3/4” wide lip for ACT to lay on, extruded aluminum, 6063-T5. Colors White. |
| Brackets | 5 1/2” x 5 3/16”, cold rolled steel ASTM A1008, Zinc plated. Wall or ceiling mount. |
| Bottom Closure Panel | 2”, 3”, 4” wide extruded aluminum, 6063-T5. Colors White, Bronze, Anodized. |
| Internal Hembar | 1/8”x1” extruded aluminum 6063-T5 flat stock. |
| External Hembar | 1 3/6”x9/16” rectangle, 1 1/2”x3/8” rectangle extruded aluminum 6063-T5. Colors: White, Bronze, Alabaster, Anodized, Black. Available at additional cost. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| Control | RTS wall Switch, hand held RTS remote, wired wall switch. |
| Sizes | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Motor Left | 26" | 156" | 18" | 240" |
| Motor Right | 26" | 156" | 18" | 240" |