C-Series
3.75" fascia manual rs
PRODUCT SPECIFICATIONS
| Operation | Bead chain through manual clutch mechanism |
| Clutch | Bead chain driven assisted by a stainless steel spring and spring shim. Clutch housing made from POM. |
| Chain | Plastic, nickel plated steel, stainless steel. |
| Idle End | Made from glass fiber reinforced PA6. |
| Tube | 1 1/2”, 1 3/4” hollow extruded aluminum(6063-T5) tube. |
| Square Fascia | Square front, 3 3/4”x 1 9/16” extruded aluminum(6063-T5). Colors: White, Bronze, Alabaster, Anodized, Black. |
| Back Fascia | Square front and back, 3 3/4”x1/2” extruded aluminum(6063-T5). Colors: White, Bronze, Alabaster, Anodized, Black. Optional |
| Ceiling Mount Bracket | 2 3/4” x 3 11/16” x 1 1/8”, Zinc plated, cold rolled steel ASTM A1008. |
| Wall Mount Bracket | 3 1/32” x 3 7/32” x 1 1/8”, Zinc plated, cold rolled steel ASTM A1008. |
| Spring Assist | Spring Assembly to assist in raising and lowering of heavy roller shades, used at manufacturers discretion. Mount on the clutch inside the tube. Made of PBT with Glass Fiber and Spring Steel |
| Fascia End Cap | ABS, square. Colors: White, Bronze, Alabaster, Anodized, Black. |
| Internal Hembar | 1/8”x1” extruded aluminum 6063-T5 flat stock. |
| External Hembar | 1 3/6”x9/16” rectangle, 1 1/2”x3/8” rectangle extruded aluminum 6063-T5. Colors: White, Bronze, Alabaster, Anodized, Black. Available at additional cost. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| P-Clip Safety Tensioner | Clear Poly-Carbonite. Shall comply with all safety requirements. |
| Sizes | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades will have 1/8” deducted at the factory from finished width. See Product Limits. |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Clutch Left or Right | 18" | 156" | 18" | 240" |
| Clutch Left or Right Spring Assist | 36" | 156" | 18" | 240" |
3.75” FASCIA MOTORIZED RS
PRODUCT SPECIFICATIONS
| Operation | Tubular motor concealed inside roller tube. |
| Motor | Totally enclosed, insulated, thermal-overload protection, brake, permanently lubricated bearings and limit switches. |
| Idle End | Made from glass fiber reinforced PA6. |
| Tube | 1 1/2”, 1 3/4” hollow extruded aluminum(6063-T5) tube. |
| Square Fascia | Square front, 3 3/4”x 1 9/16” extruded aluminum(6063-T5). Colors: White, Bronze, Alabaster, Anodized, Black. |
| Back Fascia | Square front and back, 3 3/4”x1/2” extruded aluminum(6063-T5). Colors: White, Bronze, Alabaster, Anodized, Black. Optional |
| Ceiling Mount Bracket | 2 3/4” x 3 11/16” x 1 1/8”, Zinc plated, cold rolled steel ASTM A1008. |
| Wall Mount Bracket | 3 1/32” x 3 7/32” x 1 1/8”, Zinc plated, cold rolled steel ASTM A1008. |
| Fascia End Cap | ABS, square. Colors: White, Bronze, Alabaster, Anodized, Black. |
| Internal Hembar | 1/8”x1” extruded aluminum 6063-T5 flat stock. |
| External Hembar | 1 3/6”x9/16” rectangle, 1 1/2”x3/8” rectangle extruded aluminum 6063-T5. Colors: White, Bronze, Alabaster, Anodized, Black. Available at additional cost. |
| Fabric | B/O, 1%, 3%, 5%, 8%, 10%, Translucent openness in various colors. |
| Control | RTS wall switch, hand held RTS remote, wired wall switch. |
| Sizes | Outside mounted roller shades will be made to exact ordered measurements. Inside mounted roller shades |
PRODUCT LIMITS
| Controls (Manual) | Min. Width | Max. Width | Min. Drop | *Max. Drop |
|---|---|---|---|---|
| Motor Left or Right | 18" | 144" | 18" | 240" |